Page 41 - TPM Issue4
P. 41

SCRATCH
                                                                                                          BUILT
                                                                                                         REVIEW



















                       the  FTF  and  the  Nooteboom  corners with a small brush and then
                       low-loader.  The  cabin  had  to  be  pat with a piece of fine sponge to get
                       sprayed in two colors, which meant  the desired effect. If it is too much,
                       that I had to mask off. In the past that  I  can  remove  it  with  a  brush  of
                       has gone wrong sometimes because  terpetine.  The  lacquer  layer  is
                       I removed the paint with the removal  therefore  not  affected  because  the
                       of  the  tape  and  then  had  to  model is sprayed with acrylic paint
                       start again, but this time it went well  and terpetine has no effect on it. After
                       in one go.                   this, I apply a thin layer of dirt with the
                          After spraying it was time to stick  airbrush. In this case the same dark
                       the  decals  on  the  cabin  and  the  brown Revell paint, only diluted very
                       Hitachi crane. I have drawn all these  strongly, and when everything is to
                       decals myself on the computer with  my liking, a thin layer of matte clear
                       Adobe  Illustrator  and  then  always  lacquer is sprayed over it.
                       have them printed at Decals.nl, which     The  Hitachi  crane,  however,  I
                       then  are  of  excellent  quality.  After  wanted to give a more used look and
                       sticking the decals there is always a  damage. During the construction I had
                       layer of clear varnish over it to protect  already taken that into account by,
                       the  decals.  And  when  all  of  this  is  for  example,  not  closing  the  doors
                       sufficiently dried then comes the next  properly   because   they   were
                                                    somewhat warped.The technique was
                       step, weathering it. However, the FTF
                       and the Nooteboom lowloader are
                                                    Nooteboom only more rust and more
                       only  slightly  weathered.  Lightly  the  same  as  with  the  FTF  and  the
                       polluted  and  in  the  logical  places  damage so that on the undercarriage
                       the  necessary  minor  damage  and  and  tracks,  nothing  more  of  the
                       damages  with  matte  dark  brown  All in all, it took exactly one year to
                                                    original  black  color  can  be  seen.
                       user traces. I always make those little
                       emanel paint from Revell. First a wash
                                                    build the complete model and I was
                                                    ready in time for the Jabbeke model
                       of the same dark brown to apply the
                       necessary  dirt  in  the  right  places.
                                                    building  show  in  2018  where  it
                       Then I apply small dots of paint to the
                       logical  places  like  the  edges  and  earned the first prize in the scratch
                                                    built category.

























                                                                                     Summer 2020 - TPMMW Magazine  41
   36   37   38   39   40   41   42   43   44   45   46