Sennebogen 860R Tracked Material Handler

The Sennebogen 860 is a versatile machine ideally suited for the handling and loading of various materials at scrap yards and dock sites with different undercarriage options including tracked, wheeled and stationary all available. The 860R typically weighs in between 77 and 97 ton depending on equipment options and attachments with a powerful Cummins QSM11 C360 diesel engine generating 364hp.

The cabin is mounted to an arm allowing it to be hydraulically elevated and this works well, with the cab remaining horizontal through the full range of movement.

The interior houses the driver’s seat and controls while the outer frame has grab rails, screen wipers and a rear view mirror with a highlighted door handle and Max Cab printing.

The collector has the option of fitting the side access platform with integrated safety railings or blocking the holes with the included plastic parts which is another nice touch from NZG.

The wide undercarriage features track frames with good surface engraving and cast details including access steps and hook-up points. The linked metal tracks have standard grouser pads with tensioned idler wheels keeping the tracks taut.

The model is fitted with a standard scrap handling stick which has a 5-tine cactus scrap grab attached to the end, complete with flexible hydraulic hoses.

The metal grab is fairly heavy with green panels inserted into the frame which have tiny Sennebogen markings. The grab will open and close smoothly with good structural detailing of each tine.

The upper carriage has holes where the metal safety railings need to be fitted while metal grab rails are located on the lower side for easy access to the upper works. The hydraulic distribution block has been replicated with good surface engraving of the panels and walk areas.

The paint finish is of a very high standard with the covering allowing the surface casting details to be seen with printing used to highlight the panel handles and catches.

Printing of the Sennebogen markings are crisply applied. This is one of three different replicas based on the 860 base machine with both the 860R-HD tracked and 860M wheeled handlers also produced by NZG and available from the Sennebogen Online Shop.