1:50th Scale Liebherr LTM1060-2 in Kynningsrud Livery

Presented here is the Liebherr LTM1060-2 4-axle mobile crane from Conrad which has been decorated in the Kynningsrud company colours. This is another model which does not have the printed company details. The four axles feature working steering allowing tight radius turning and crab steer modes with detailed rubber tyres with an authentic tread pattern.

The four outriggers are made of plastic and slide out easily with screw adjustable pads which can be lowered to raise the wheels off the ground. The crane cab has a replicated interior with the ability to tilt by about 25 degrees. The main boom consists of five sections which extend telescopically with small spring mounted clips inside the booms to prevent them being pulled all the way out. This spring also helps the sections to remain in position without sliding back down.

The separate counterweight block can be fastened to the rear of the crane by turning the metal screw fittings which secure the counterweight in place. The model also comes with boom mounted, two section lattice jib  which fastens to the side of the boom by using the two plastic brackets that fit to the cast lugs on the boom side which help to keep the jib firmly in place. two metal pins are provided to connect the jib to the boom head.