Dynapac SD2500WS Wheeled Paver
Presented here is the 1:50th scale Dynapac SD2500WS wheeled paver from NZG. This is one of three new Dynapac models from NZG and has plenty of fine detailing with good functionality throughout, accurately capturing the realism of the full sized paver.
The rear screed has been replicated well with a diamond plate anti-slip texture on all the surfaces, including the integrated access steps across the rear of the screed. Metal safety rails have been added leading up to the driver's station, complete with a hinged central section which pivots as the screed is adjusted.
Other detailing includes the two large gas bottles mounted to the rear screed and the end sections of the screed can be hydraulically extended with nicely decorated control panels housed on each side. The screed frame can be raised/lowered and the hydraulics are very stiff, allowing it to remain in the chosen position.
|
|
The hopper features pivoting side panels which are tight enough to remain in the raised position. The lower bed of the hopper has a ridged texture to simulate the conveyor.
|
|
The small rubber wheels have a deep tread pattern and freely rotate. Topping off the front detail is the pivoting wheel bar with rotating rollers and the black painted, simulated rubber flaps on the front edges of the hopper. |
The model can be realistically posed in a transport configuration with the canopy brackets folding forward to reduce the model's height. The canopy frame is connected to the exhaust stack which also folds forward while the extending end sections of the screed can be set in their retracted position to reduce the width.
One great feature of the model is the full length sliding operator's station which can extend out on each side of the body to allow the driver an unobstructed view of the area and this is fully functional on the model. The main control console has been authentically decorated with the screens and controls of the full sized machine, complete with steering wheel. The entire console assembly can traverse from the left to the right seating positions which is a nice touch.
As expected from NZG, the paint finish is excellent with an even coating and vibrant colours while the tampo printed markings are crisply applied. The model is supplied in a two-section polystyrene carton with printed outer cardboard box. Two additional tracked paver models have also been produced by NZG, the SD2500CS and SD2550CS and the three are a nice addition to the Dynapac model range.
